Today is May 8th, 2022, World Smile Day. The title of this article has highlighted the key points for everyone¡ª¡ªMDP Mini Digital Power System has launched an electronic load module! It is the third type of modules and the fourth product of MDP system¡ª¡ª

MDP DC Electronic Load MDP-L1060

       This is a "highly anticipated" module~ In the initial product conception of MDP Mini Digital Power System, the electronic load module has been listed as one of the sub-modules and written into the MDP system product development plan. And this product has actually been tested for feasibility a long time ago. Since it belongs to MDP system, the sub-module needs to form a stacking effect with other modules, the length and width of the electronic load are already limited, and considering the aesthetics, the product cannot be infinitely increased. Therefore, it is necessary to make an efficient load equipment in such a small volume--this is not an easy task! How to efficiently dissipate heat is the most important thing. The performance parameters and volume of each component will affect the final performance of the load. It takes a lot of time to select the cooling fan and the design of the radiator, and various performances have to be carried out. After testing and precision matching, this load module is finally completed, we should add a chicken leg to the engineers!

Without further ado, let's dig into this smart DC electronic load for everyone.

         MINIWARE DC Electronic Load MDP-L1060 is the first programmable intelligent DC electronic load module of MDP Mini Digital Power System. It continues the stackable appearance design of MDP Mini Digital Power System. The main body adopts a CNC aluminum alloy frame. Come on, this is what a senior electronic engineer should have on his desktop, with a strong sense of technology!

        The MDP-L1060 load module has four working modes: constant current (CC), constant voltage (CV), constant resistance (CR) and constant power (CP). The maximum load input is 100W, and the maximum voltage and current can reach 60V and 10A, enough to meet the daily load test requirements and can be used in test scenarios of various AC/DC power supplies, DC/DC converters, chargers, batteries, adapters, and power electronic components. At the same time, this load module also has all-round intelligence protections such as over-voltage (OVP), under-voltage (UVP), over-current (OCP), over-power (OPP), over-temperature (OTP), and reverse polarity (Anti-Reverse). The safety protection functions ensure the safety of the load input device and itself, and avoids booming and burning the machine.

        Have you ever heard of an electronic load with a built-in battery? If not, then congratulations, you will be exposed to a programmable DC electronic load with 650mAh built-in rechargeable lithium battery. You may ask, what is the use of this lithium battery? First of all, the built-in lithium battery can meet the short-term wireless load test, and you can take it to any place to test the device for a short time without connecting to the power; second, when the power supply device is unstable or may be temporarily cut off under normal circumstances, the built-in battery can continue to supply power to prevent ongoing tests from being interrupted due to power outages¡ªI believe that many people have tried crashing an e-file due to power outages or errors. But pay attention, the power supply time of the built-in battery of the electronic load will vary according to the actual power capacity, usage scenarios and environment. Here is a reference value for everyone: in a room temperature environment of 25¡ãC, use the highest load input of 100W, and the built-in battery is fully charged, MDP-L1060 can run for about 50 minutes.

        In addition to the built-in lithium battery, this load module also has a built-in high-efficiency brass heat sink and 2 high-speed cooling fans. The fans can also automatically adjust the wind speed to dissipate heat according to the load consumption. There are hollow decorative sheets on the front and back of the device to maximize the air intake and ensure the heat dissipation speed. The load input port uses the same 4mm gold-plated standard three-purpose input port as MDP digital power module, and is equipped with an XT30 remote compensation input port to complete a more accurate load test.

         As the electronic load module of MDP series, MDP-L1060 also adopts 2.4G wireless communication, which can achieve wireless communication with the display control module (MDP-M01) of the same system, and perform complex remote control, and advanced functions such as battery capacity test, battery internal, resistance test, factory test, dynamic test, over-current protection test, and also flexible trigger options make the usability stronger. In addition, the load module can also perform programming load testing, which is simply "SOOO COOOL"!

       Fans who follow MINIWARE's official Tweet or product sharing groups should know that some sellers on some e-commerce platforms have already pre-sold MDP DC electronic load MDP-L1060 last week. This listing article indicates that the stock is on the way. Long-awaited friends, hurry up!